Product Description
ELECTRIC SHOWER HEAD TANKLESS HOT WATER HEATER 220 V
BRAND NEW ! FACTORY SEALED BAG
FREE 14" NIPPLE INSTALLATION KIT
READY TO INSTALL (See Installation Details at the end of this listing)
3 litERs minute (46 gal /hour - 0.8 gAl /min)
110 volts - 25 amps
Power Rating: 2750 W
Retails for $89
Check out our feedback from satisfied customers!
You are buying the world famous ELECTRIC SHOWER HEAD TANKLESS HOT WATER HEATER
PERFECT FOR POOL SIDE HOT SHOWER RINSE OFFS, ALSO GREAT FOR CABINS WHERE YOU DON'T REALLY NEED A HOT WATER HEATER PLUS ALL THE EXTRA PIPING.
THESE SHOWER HEADS ARE USED IN 80 % OF ALL HOUSEHOLDS IN BRAZIL AND THEY WORK GREAT. OPERATES ON 220 -230 VOLTS 3000 WATTS AT 15 AMPS.
YOU ONLY NEED A 12 AWG WIRE FROM THE FUSE BOX TO YOUR SHOWER AREA.
YOU WILL NEVER RUN OUT OF HOT WATER. EVERYONE GETS A HOT SHOWER.
WORKS GREAT EVEN WITH 2PSI WATER PRESSURE UP TO 150 PSI.
HEAD SIZE ABOUT 3", WORKS WITH PLASTIC OR METAL PIPING, POSITION ABOUT 14" FROM WALL.
THIS IS A QUESTION FROM A SATISFIED CUSTOMER:
CAN THE SHOWER-HEAD WHICH COMES WITH/ON THIS WATER-HEATER UNIT, BE SWITCHED/REPLACED WITH ANOTHER (STANDARD / COMMONLY AVAILABLE) SHOWER-HEAD?
OR, IS THE HEAD THAT'S ALREADY ON THIS UNIT, A PERMINENT/UNIQUE PART OF IT (AND THUS UNREPLACABLE)?
ANSWER
The answer is that you can remove the "showerhead" (THE SHOWERHEAD IS THE BLACK PART IN THE PICTURE) and change it to another Standard 1/2" inlet shower head.
You can also install the electric part of showerhead concealed somewhere else * and run a Pex or PVC or Copper line from the male 1/2" outlet to the new standard outlet., this will make a slick installation.
* As long as this place is after the open / close fixture and above the shower outlet.
Automatic Startup: No Switch required
Technical Details
2010-09-18
By WT
I have an unusual situation. I live off the mail grid so my address shows up as "no good". Ups and FedEx do deliver to my home. The seller contacted me to verify my address then promptly shipped my product. This is an excellent green product from an excellent seller. many thanks!
ELECTRIC SHOWER HEAD TANKLESS HOT WATER HEATER 220 V
BRAND NEW ! FACTORY SEALED BAG
FREE 14" NIPPLE INSTALLATION KIT
READY TO INSTALL (See Installation Details at the end of this listing)
3 litERs minute (46 gal /hour - 0.8 gAl /min)
110 volts - 25 amps
Power Rating: 2750 W
Retails for $89
Check out our feedback from satisfied customers!
You are buying the world famous ELECTRIC SHOWER HEAD TANKLESS HOT WATER HEATER
PERFECT FOR POOL SIDE HOT SHOWER RINSE OFFS, ALSO GREAT FOR CABINS WHERE YOU DON'T REALLY NEED A HOT WATER HEATER PLUS ALL THE EXTRA PIPING.
THESE SHOWER HEADS ARE USED IN 80 % OF ALL HOUSEHOLDS IN BRAZIL AND THEY WORK GREAT. OPERATES ON 220 -230 VOLTS 3000 WATTS AT 15 AMPS.
YOU ONLY NEED A 12 AWG WIRE FROM THE FUSE BOX TO YOUR SHOWER AREA.
YOU WILL NEVER RUN OUT OF HOT WATER. EVERYONE GETS A HOT SHOWER.
WORKS GREAT EVEN WITH 2PSI WATER PRESSURE UP TO 150 PSI.
HEAD SIZE ABOUT 3", WORKS WITH PLASTIC OR METAL PIPING, POSITION ABOUT 14" FROM WALL.
THIS IS A QUESTION FROM A SATISFIED CUSTOMER:
CAN THE SHOWER-HEAD WHICH COMES WITH/ON THIS WATER-HEATER UNIT, BE SWITCHED/REPLACED WITH ANOTHER (STANDARD / COMMONLY AVAILABLE) SHOWER-HEAD?
OR, IS THE HEAD THAT'S ALREADY ON THIS UNIT, A PERMINENT/UNIQUE PART OF IT (AND THUS UNREPLACABLE)?
ANSWER
The answer is that you can remove the "showerhead" (THE SHOWERHEAD IS THE BLACK PART IN THE PICTURE) and change it to another Standard 1/2" inlet shower head.
You can also install the electric part of showerhead concealed somewhere else * and run a Pex or PVC or Copper line from the male 1/2" outlet to the new standard outlet., this will make a slick installation.
* As long as this place is after the open / close fixture and above the shower outlet.
Automatic Startup: No Switch required
Technical Details
- YOU WILL NEVER RUN OUT OF HOT WATER. EVERYONE GETS A HOT SHOWER
- WORKS GREAT EVEN WITH 2PSI WATER PRESSURE UP TO 150 PSI.
- PERFECT FOR POOL SIDE HOT SHOWER RINSE OFFS, ALSO GREAT FOR CABINS WHERE YOU DON'T REALLY NEED A HOT WATER HEATER PLUS ALL THE EXTRA PIPING.
- This amazing instant water heater is designed for one point of use at a time and it can be connected to the existing hot water piping
- It delivers over 40 gallons of hot water an hour with a 45 degree rise in temperature. This means that if your tap water is at 65 °F, it will instantly deliver 40 gallons of hot water an hour of water at 110 °F.
2010-09-18
By WT
I have an unusual situation. I live off the mail grid so my address shows up as "no good". Ups and FedEx do deliver to my home. The seller contacted me to verify my address then promptly shipped my product. This is an excellent green product from an excellent seller. many thanks!